Setting The Work Clamp Lift Amount - Brother BAS-311H Instruction Manual

5-5. Setting the work clamp lift amount

The settings for the work clamp and intermediate work clamp lift amount can be changed using the operation panel.
* For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be available.
1
THREAD/CLAMP indicator illuminates
2
Motor-driven work clamp specifications only
When the setting value for memory
switch No. 003 is "2"
NOTE:
When setting the work clamp height and the
intermediate presser foot work clamp height, check
that the slider (1) is touching the work clamp lifter
plate assembly (2).
3091B
All indicators switch off
MENU indicator switches off
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Press the THREAD/CLAMP key.
The sewing machine will switch to threading mode.
• " 1" will appear in the PROGRAM No. display, and the work
clamp will be lowered.
Press the key.
The sewing machine will switch to work clamp height setting mode.
• " 2" will appear in the PROGRAM No. display, and the work
clamp will be raised to the setting value which appears in the
menu display.
(Work clamp height setting: 15 − 25)
or
Press the key to set the work clamp height.
• The work clamp will be raised or lowered to the height of the
setting value.
• If you press the
or
display will flash.
• If you press the RESET key while the height display is flashing,
the setting value will return to the value before the change was
made.
• Press the ENTER key to accept the setting.
Press the key.
The sewing machine will switch to intermediate work clamp
height setting mode.
• " 3" will appear in the PROGRAM No. display, and the work
clamp will move to the setting value that appears in the menu
display.
(Intermediate work clamp height setting: 1 − 15)
Press the or key to set the intermediate work clamp
height.
• The work clamp will be raised or lowered to the height of the
setting value.
• If you press the
or
clamp height, the height display will flash.
• If you press the RESET key while the height display is flashing,
the setting value will return to the value before the change was
made.
• Press the ENTER key to accept the setting.
BAS-311H
key to change the height, the height
key to change the intermediate work
3088B
3089B 2414B
3090B
38