you find a hardware problem
keyboard problems
The keyboard doesn't work.
Make sure...
The keyboard cable is correctly
connected.
The keyboard is free of debris.
The keyboard itself is not
defective.
You are using the correct driver.
You are using the latest firmware.
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
How
Plug the cable into the correct connector on the back of the
system. (Keyboard port is labelled.)
Check all keys are at the same height, and none are stuck
down.
Either replace the keyboard by a known working unit or try
the keyboard with another system.
Download and install the latest driver.
• For workstations: go to the "Software and Drivers"
section of the HP support site:
www.hp.com/go/bizsupport
For servers: go to
•
www.hp.com/support/itaniumservers
• Refer to your OS documentation for instructions on
installing drivers.
Download and install the latest firmware.
• For workstations: go to the "Software and Drivers"
section of the HP support site:
www.hp.com/go/bizsupport
For servers: go to
•
www.hp.com/support/itaniumservers
Troubleshooting
2–3