HP Integrity rx2600 Getting Started Manual page 37

graphics and monitor problems
The monitor doesn't work.
The system's power indicator light works but the monitor remains blank.
Make sure...
The monitor power cord is correctly
connected.
The monitor is switched ON (LED is on).
The graphics card is installed and the video
cable is correctly connected.
The monitor's brightness and contrast settings
are correctly set.
The EFI console output settings are correct.
If the system starts and you still have a problem, see "Software Diagnostics Tools" on
page 2-13.
you forgot the EFI password(s)
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
How
Ensure the power cord is plugged into a
working grounded power outlet and into the
monitor.
Refer to the monitor manual for an
explanation of the LED signals.
Ensure the monitor (video) cable is properly
connected to both the system and the
monitor. Ensure that the cable is connected
to the graphics card connector.
Check the settings using the on-screen
display or the controls on the front of the
monitor. See your monitor documentation for
instructions.
Check and correct the settings using the EFI
Boot Options Maintenance Menu. For
instructions, see page 1-20.
Troubleshooting
2–5