Changing Languages - Dish Network SoloDVR ViP 612 User Manual

Chapter 11

Changing Languages

1
Press MENU, select System Setup, and then Local Channels.
2
Select Chan Display.
Note: Changing the channel display preference may cause timers on those channels to be
lost. Review your timers list after making any changes (refer to Using the Timers List on
page 53).
3
Choose a preference for how local channels display in the Program Guide and other
channel lists under Local Sat Channels:
• HD Priority—display only HD versions of the local channel below 100 at the local sta-
tion's channel number. If an HD local channel is not available, the SD channel is
listed.
• SD Only—display only SD local channels below 100. HD channels display in the four-
digit channel range.
• HD and SD (default)—display both HD and SD local channels at the local station's
channel number.
• Disable—HD and SD local channels are found only in the four-digit channel range.
4
Choose a preference for how DishHD channels display in the Program Guide and other
channel lists under DishHD channels:
• Enable (default)—DishHD channels display at the SD channel number.
• Disable—DishHD channels display in the four-digit channel number.
5
Select Done on the Channel Display screen.
6
Select Done on the Local Channels screen.
C
HANGING
You may be able to change the language of some programs. An alternate language may
not be available for all programs. Some programs, such as movies, indicate at the
beginning whether an alternate language or descriptive audio is available. An alternate
language applies only to the audio part of a program and does not change the language
used in the menus displayed by the receiver. Descriptive audio—not included on all
channels and programs—is a feature for the visually impaired that describes what is
happening during a program.
80
L
ANGUAGES