Table of Contents
Advertisement
Chapter 11
Using Troubleshooting Tools
Diagnostics
The Customer Service Representative may ask you to open the Diagnostics screen. Remember to
have an active phone line connected to your receiver.
1
Press MENU, select System Setup (6), and then select Diagnostics. The Diagnostics screen
shows you various tests the Customer Service Representative may ask you to perform on your
receiver:
•
Connection - Tests for a valid receiver phone connection.
•
Dial Out - If "No Dial Out Pending" is displayed, the receiver does not need to have its smart
card records updated.
•
Counters - Shows you a list of diagnostic counters. Use PAGE UP and PAGE DOWN to scroll
through the list of counters displayed.
2
Select Done.
Point Dish and Check Switch
The Point Dish and Check Switch screens are helpful to the Customer Service Representatives.
You may be asked to display these screens when you call DISH Network. Even though there are
items that can be changed, only change them when specifically directed by a Customer Service
Representative.
80
Advertisement
Table of Contents
Troubleshooting
