Teaching Another Remote Control - Dish Network Solo 381 User Manual

Chapter 9

Teaching Another Remote Control

1
Make sure the TV is on.
2
Press and hold RECOVER until all four mode buttons light, and then let go of the button. The SAT
mode button flashes twice and then all four mode buttons flash three times.
3
Press RECOVER. Wait for the TV or VCR mode button to flash once and then all four mode but-
tons to flash once.
4
If you see the System Info screen, press the Select button to close the screen. You have recov-
ered your satellite video.
5
If you do not see the System Info screen, repeat steps 3 and 4 until you have recovered your sat-
ellite video.
Note: Press any remote control button other than RECOVER to end this procedure.
From the History Vault - Robert Adler invented the first wireless TV remote
control for Zenith. The "Zenith Space Command" brought the "clicker" into
American homes (and vocabularies) in 1956.
T A
EACHING NOTHER
Your DISH Network receiver can pass certain functions through from the original receiver remote
to another remote. Although most learning remotes are compatible with the Teach Remote option
featured in your DISH Network receiver, there may be a few that are not. Consult your universal
learning remote user's guide for details.
Follow these steps to teach (program) a universal learning remote from the remote supplied with
your satellite receiver. The universal learning remote is not supplied with your receiver. You can
purchase it separately at an electronics supply store.
56
R C
EMOTE ONTROL