Table of Contents
Advertisement
Basic TV Operation
PIP (Picture-in-Picture) Operation
The PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC
format) picture on top of the main analog picture.
Your TV is equipped with a dual NTSC tuner that tunes to cable or off-air television
signals. You will only be able to use the PIP window and main picture with analog
channels.
PIP Buttons
There are certain remote buttons that control the way the PIP window works:
PIP Brings up the PIP window. Press PIP again to remove the window.
Arrows Let you move the PIP window to different areas of the screen.
SWAP Switches, or "swaps," the video from the PIP window with the main picture.
CH CTRL (Channel Control) Lets you switch channel control between the PIP window
and the main picture. To determine whether you are controlling the PIP or the main
picture, look at the channel banner as you change channels. The triangular indicator is
beside the channel number for the picture you're controlling.
Main
picture
channel
number
Channel
control
indicator
Using the PIP Feature
While you may use PIP in different ways, this basic PIP scenario should get you started.
When watching an analog channel, follow these steps.
1. Press the PIP button on the remote control. The PIP window appears on the screen.
2. Use the channel up and down or digit buttons to change the PIP channel.
3. To change the program in the main picture window, press CH CTRL. Then use the
channel up and down or digit buttons.
To go back and forth between controlling the PIP window and the main picture, press the
CH CTRL button.
30
PIP channel
number
Note that you will only be
able to use PIP with
analog channels.
ON • OFF
VCR1
TV
DVD
VCR2
AUX
DIRECTV
MUTE
SKIP
CH +
CH -
FETCH
GO BACK
GUIDE
INFO
OK
Arrows
MENU
CLEAR
1
2
3
4
5
6
7
8
9
INPUT
ANTENNA
0
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
PIP
PIP
SWAP
CH CTRL
WHO
buttons
Chapter 3
Advertisement
Table of Contents
