Maytag MFC2061HES - 20 cu. Ft Use And Care Manual page 9

Removing Front=Mounted Handles for
Stainless Steel Doors
/-
1. Remove plastic button plug at base /-_
of handle with a very small fiat-blade
screwd river.
Insert phillips screwdriver into
predrilled hole to remove screw.
2. Slide handle down and remove
from door clip.
3. Repeat above steps to remove
other handle.
Removing Front=Mounted Handles for
Stainless Steel Freezer Door
1. Remove right side plastic button
plugs at each end of handle
with a very small fiat-blade
screwd river.
Insert phillips screwdriver
into predrilled hole to remove
screw.
2. Slide handle right and
remove from door clip.
\
Installing Front=Mounted Handles for
Stainless Steel Freezer Door
1. Loosen lower door clip on door
with a phillips screwdriver
2. Locate predrilled hole at base of
handle, and fit hollow end of
handle over left door clip.
\
3. Fit other end of handle over
left door clip and slide left as
far as possible.
NOTE: If end of handle does _\
not fit over left clip, loosen
right clip further until fit can
be accomplished.
4. Insert phillips screwdriver
into predrilled hole at end of
handle to tighten screw.
Insert plastic button plug into
hole.
Connecting the Water Supply
cont.