Advertisement
Available languages
Available languages
fempereture
If the freezer or fresh food temperatures
have
exceeded these limits, the display will alternately
show
the current compartment
temperatures
and the highest
compartment
temperatures
reached when the power
was out. An audible alarm will sound repeatedly.
Press the Temp Alarm pad once to stop the audible
alarm. The Temp Alarm light will continue to flash and
the temperatures
will alternate until the temperatures
have stabilized.
To turn off Temp Alarm, press and hold the Temp
Alarm pad for three seconds.
The indicator
light will
go off.
Door Alarm
The Door Alarm will alert you when one of
doors has been left open for five continuous
minutes.
When this happens, an audible alarm will sound every
few seconds until the door is closed OR the Door
Alarm pad is pressed to deactivate the feature.
Max Cool
When activated, Max Cool causes the fresh
food and freezer temperatures
to drop to the minimum
settings on the control.
This cools down the
refrigerator
and freezer after extended door openings
or when loading the refrigerator
or freezer with warm
food.
Note:
When the Max Cool feature is in
operation, the _$_ and _-_ pads for the refrigerator
and freezer controls will not operate.
To activate, press the Max Cool pad. Max Cool will
deactivate
automatically
after 12 hours, OR press the
Max Cool pad to deactivate the feature.
User Preferences
Access the User Preferences
menu to:
• Activate or turn off Super Cool (select models)
• Change the temperature
display from °F to °C
• Enable or disable audible alarms.
• Adjust the light level at which the Dispenser Auto
Light will illuminate
(when this feature is activated on
the ice and water dispenser)
(select models)
• Activate the Sabbath Mode
To access the User Preferences
menu, press and hold
the Door Alarm pad for three seconds.
When in the
User Preferences
mode, a short title for the feature will
appear in the Freezer temperature
display and the
feature status will appear in the Fresh Food display.
1. Use the Freezer up and down control to scroll
through
the features.
2. When the desired feature is displayed, use the Fresh
Food up and down control to change the status.
3. When changes are complete, press the Door Alarm
pad for three seconds OR close the Fresh Food door.
Super
Cool (CO]
[seJect
models)
When Super Cool is ON, an air-mixing
fan in the fresh
food compartment
is activated to improve air flow and
temperature
control.
To save energy, this feature may
be deactivated
by choosing OFE
Temperature
Display
[F_C)
Change the display to show temperatures
in degrees
Fahrenheit or degrees Celsius.
Alarm
(AL]
When the Alarm mode is OFF, all audible alarms will be
disabled until the feature is turned on.
Auto Light Level Selection
(LL)
(select
models)
This setting adjusts the light level at which the
dispenser light will illuminate when the sensor detects
that the light levels in the room are low. Setting 1 is
the darkest light level setting, setting 9 is the lightest
light level setting.
Note:
The Auto Light (select
models) must be activated on the ice and water
dispenser control to take advantage
of this option.
Sabbath
Mode
(SAB)
When the Sabbath Mode is ON, all control lights and
the night light will be disabled
until the feature is
turned OFE This feature does not disable the interior
lights.
Press any pad to restore the control lights.
Warm Cabinet
Surfaces
At times, the front of the refrigerator
cabinet may be
warm to the touch.
This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabinet.
This condition
will be more noticeable when
the refrigerator
is first started, during hot weather and
after excessive or lengthy door openings.
12
Advertisement
