ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 89

R
ECOGNIZING AND
4–20
10. Proceed from Step 8 to continue or end the job.
11. To end the job, click End in the Add More Pages dialog
box.
At any time, you can go on to queue up the saved page images for
document recognition. For information, refer to the next section,
"Recognizing and Converting Image Files."
C
ONVERTING
The second phase of deferred processing is to run document
recognition on saved page image files.
Page image files can be created by TextBridge Pro (refer to
"Scanning Pages for Deferred Processing"). Alternatively, page
image files can originate from fax modems or other sources.
TextBridge Pro can process page images stored in PICT or most
TIFF formats. Page images must be binary (black type on a white
background), and have resolutions ranging from 72 to 900 dots
per inch.
For best results, process page images together that are from the
Notes
same document and have the same resolution. While it is possible
to process page images of differing resolutions and type styles, it
is not recommended.
Also, it not recommended that you process page images over 400
dots per inch in resolution. While TextBridge Pro can recognize
higher-resolution images, these files can put a severe strain on
system resources without improving OCR accuracy.
The following procedure assumes that the TextBridge Pro main
application is active.
TextBridge Professional Edition User's Guide
I F
MAGE ILES