ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 162

1087 The scanner's image settings are invalid. Check the
resolution and page size settings.
The scanner is preparing to transfer an invalid image. This
message most likely occurs when the image resolution, image
height or width is set to a value equal to or less than zero. Check
that the scanner settings are valid.
1088 The scanner stopped because its out of memory buffers.
The scanner has run out of memory. Quit TextBridge Pro and use
the Get Info command to make sure that enough memory is
allocated to TextBridge Pro. Some scanner drivers require more
memory than others to acquire an image.
1089 The scanner returned an image that is not the correct size.
The scanner has transferred an image with a size that is different
than expected. Set the page size to a different value and try
again.
1093 The selected TWAIN source returned invalid container
type for capability. This TWAIN source cannot be used.
This message is unlikely to occur; it might appear if a TWAIN
scanner isn't conforming to the TWAIN standard. Contact our
website for the latest list of supported scanners, FAQ's
(Frequently Asked Questions), TIB's (Technical Information
Bulletins), and more.
1094 The selected TWAIN source returned invalid item type for
container. This TWAIN source cannot be used.
Refer to error 1093.
1095 The selected TWAIN source does not support a required
capability.
Refer to error 1093.
Troubleshooting and Error Messages
A–17