ScanSoft PDF CONVERTER PROFESSIONAL 3-HELP Online Help Manual page 41

 Drag the
Rotate
the red circle above the object. The cursor will change its shape. Drag it in the
desired direction. While dragging, the cursor shape will change again.
Editing objects with the Touchup Object tool
Use the Touchup Object
1. Click the tool in the Main Toolbar or select Touchup /
the Tools menu.
2. Click the object and make the necessary last-minute changes (e.g. resize or
deskew).
3. Use the shortcut menu to save the object, send it to Clip Art, send to back or
bring to front.
Note: For large-scale editing use the original application and then regenerate the
PDF file.
Editing Text with the Touchup Text tool
Use the Touchup Text
1. Click in the Main Toolbar or select Touchup /
menu.
2. Click where you want to add new text. When the text editing cursor appears, use
the keyboard for text editing.
Limitations
Editing should be kept to a minimum because the PDF format is mainly for document
exchange, distribution and publishing, not for large-scale text revision.
 You can edit text only within single lines.
 Text editing may not succeed on text where only a subset of the original font is
embedded.
Overlaying Files
This feature is useful, for example, if you want to put a small image (e.g. a logo) on
the first page or on each page of a multi-page document.
1. Open two files (a longer document in doc, rtf or pdf format and an image file
containing a logo) in the Create PDF dialog box.
2. Select Overlay files as one PDF document
3. Click the arrow in the Position selection box and choose a value. The default
overlay position is
handle to rotate the object. To get the
tool to make small corrections to images.
tool for minor, last-minute editing tasks.
Page Center.
Rotate handle, click on
Touchup Object
Touchup Text
in the Create PDF dialog box.
from
from the Tools
41