Rotating Photos To Fit; Flipping For Iron-Ons - ScanSoft KAI S PHOTO SOAP 2 User Manual

Rotating Photos to Fit

At times you will want to rotate a photo before you print it. For example, if you are
printing to 8.5 x 11 paper and want to print a wide photo, you'll want to rotate the photo
so the long side of the photo prints on the long side of the paper.
To rotate photos:
1 If needed, drag the photo(s) you want to print from the Transporter.
2 Choose Output menu > Print, or click the Print tab.
3 If needed, click the Tool button and select Auto Rotate.

Flipping for Iron-Ons

You can use Soap 2 to create custom tee shirts for the family reunion. If you have ever
seen an iron-on transfer, you'll remember that the image was the reverse of how it
appeared once it was ironed on, To make an iron-on image, you need to create a reverse of
the final image so that once you iron it onto the fabric, it faces the correct way. Soap 2
allows you to simply create a flipped image.
To flip an image:
1 Select the photo you want to scale by dragging it from the Transporter to the
working area, or by clicking on it if it is already loaded.
2 Choose Output menu > Print, or click the Print tab.
3 If needed, click the Tool button to display the print settings.
4 Select Flip Horizontal.
5 Click Print to print the flipped image.
A flipped image.
If you have any questions about loading special papers, refer to
Correctly" on page 128.
"Loading Special Papers
135