3.2
Installer
3.2.2
Settings of the image controller
The network setting of the image controller is necessary beforehand.
TCP/IP Setting
Specify the IP address in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [TCP/IP Set-
ting] of this machine.
JSP Setting
Specify the port number in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [JSP Set-
ting] of this machine.
-
The default value is "30081". Usually, the amendment is unnecessary.
-
When [JSP Setting] is [Enable] and [Authentication Setting] is [Disable], you can use Job Centro.
d
Reference
For details of the settings for the image controller, refer to "User's Guide - POD Administrator's Reference".
IC-601
3
3-3