Printer Detection Settings - Konica Minolta PageScope User Manual

3 Printer Agent Configuration

3.4 Printer Detection Settings

After clicking the [Advanced] button, various settings can be made to
specify the location in which printers are detected.
On the "Default Setting" tab of the Advanced dialog, you can change the
following two settings:
• SNMP Community Setting:
You can select a different read community (usually specified as
"public"), which is used for communicating with Minolta printing
devices.
• IP Discovery Setting:
You can define the maximum hop count (number of routers passed
through) when detecting printers automatically. The default value is
0, and users are allowed to enter a hop count between 0 and 10.
However, for cases when printers are to be located with a hop count
above 10 and for better performance during detection, users can add
an additional subnet in which printers are detected, as described
below.
14