6.3
Job Operation in the Image Controller (Image Controller Hold)
Function
[Output Mode]
[Secure Print]
[User Auth/Account Track]
[Specify Print Range]
IC-601
Description
You can specify the output mode (Print, Main Body Hold/Print, Main
Body Hold).
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by pressing [Print] on the Print Setting screen.
Check this to add the password to the job when sending it to the
main body if [Main Body Hold] is selected in [Output Mode].
You need to input the password in the control panel in the main body
to print the job.
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by clicking [Print] on the Print Setting screen.
Click this to set the user authentication information if the User Au-
thentication/Account Track function is enabled in the main body.
You can specify the print range.
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by clicking [Print] on the Print Setting screen.
6
6-22