Action
1
If the printer is installed in a high altitude
location, set the altitude of the location.
Launch the Tool Box, and click Adjust
1
Altitude on the Printer Maintenance tab.
Select the value close to the altitude of the
2
location where the printer is installed.
Is them problem recovered?
Auger mark
Action
1
The toner cartridges may be low or need to be
replaced. Confirm the amount of toner in each
toner cartridge.
Check the toner level in the Status tab in the
1
Status Monitor.
Replace the toner cartridges as necessary.
2
Is the problem recovered?
2
Start Developer Stir Mode.
Launch the Tool Box, click Developer Stir
1
Mode on the Diagnosis tab.
Click the Start button.
2
Is the problem recovered?
Yes
No
The task is
Contact Dell.
complete.
Yes
No
The task is
Go to action 2.
complete.
The task is
Contact Dell.
complete.
Troubleshooting
151