Charging Your Battery - Ericsson R250d PRO User Manual

Removing Your Battery
Removing the battery is the reverse of attaching it to the
terminal.
1 Make sure that the terminal is turned off before
removing the battery.
2 Press the two latches on the top of the battery.
3 Lift the battery up and away from the terminal.
8

Charging Your Battery

Your terminal is packaged with a rapid charger. You
should fully charge the battery before you attempt to use
your terminal. While you are charging your terminal
with your rapid or travel charger, you will still be able to
make and receive calls. You can purchase an overnight
charger or a travel charger from your nearest Ericsson
accessory retailer.
Never attach the charger to a terminal that does not have
a battery installed.
1 Make sure that the battery is attached to the termi-
nal.
2 Connect the charger to the AC power.
3 Connect the other end of the cable to the terminal
according to the picture. The flash symbol on the
plug must face upward (you may have to press
firmly).
Getting Started