Rom Monitor Commands - Cisco AS5350 - Universal Access Server Configuration Manual

Appendix

ROM Monitor Commands

At the ROM monitor prompt, enter ? or help at the
commands and options, as follows:
rommon 12 > help
alias
boot
break
confreg
cont
context
cookie
dev
dir
dis
dnld
dram
frame
hardware_info
help
history
meminfo
repeat
reset
set
show_spd
sleep
stack
sync
sysret
unalias
unset
You can display additional details for a command by entering the command name with a -? option, which
Note
prints the command usage message.
The commands are listed and described in alphabetical order. Note that the ROM monitor commands are
case sensitive.
•
OL-3418-02 B0
set and display aliases command
boot up an external process
set/show/clear the breakpoint
configuration register utility
continue executing a downloaded image
display the context of a loaded image
display contents of cookie PROM in hex
list the device table
list files in file system
disassemble instruction stream
serial download a program module
verify DRAM
print out a selected stack frame
display hardware information
monitor builtin command help
monitor command history
memory information (-spd dumps SDRAM cookie)
repeat a monitor command
system reset
show all monitor variables
show all SPD data
millisecond sleep command
produce a stack trace
write monitor environment to NVRAM
print out info from last system return
unset an alias
unset a monitor variable
alias [name=value]—Aliases a name to a value. If the value contains white space or other special
(shell) characters, it must be quoted. If the value has a space as the last character the next
command-line word is also checked for an alias (normally only the first word on the command line
is checked). Without an argument, this command prints a list of all aliased names with their values.
For example:
rommon 1 > alias
r=repeat
h=history
?=help
b=boot
ls=dir
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
prompt to display a list of available
rommon n >
ROM Monitor Commands
-3