Maintenance And Troubleshooting; Preventive Maintenance; Cleaning Your K2661 - Kurzweil K2661 Musician’s Reference Manual

Chapter 8

Maintenance and Troubleshooting

Preventive Maintenance

With a modicum of care, your K2661 will give you years of use and enjoyment. There are just a
few important points to keep in mind.
Proper installation is essential to the health and welfare of your K2661. It should always rest on
a hard flat surface—and on its rubber feet, not on the bottom panel.
Never block the ventilation openings; doing so can cause overheating that will seriously damage
your K2661. To provide adequate ventilation, the rear panel should be at least four inches from
any vertical surface. Try to minimize the amount of dust in the environment.
The K2661's RAM backup battery, along with any sample RAM, or ROM block options you may
install, are the only user-serviceable parts in the K2661. The only part you should ever
disassemble on your K2661 is the access panel on the bottom of the instrument—removing
anything else will void your product warranty.

Cleaning Your K2661

It's a good idea to remove dust from your K2661 occasionally. You may also want to remove
fingerprints. You can clean the K2661's front panel with a soft damp cloth, and use a mild soap
or detergent. Never use strong cleaners or solvents, and never spray anything on the front panel
or into the ventilation holes. Any cleaners you may want to use should be applied to your
cleaning cloth; you can then carefully wipe the surfaces of the K2661.
Maintenance and Troubleshooting
Preventive Maintenance
8-1