Kurzweil K2661 Musician’s Reference Manual page 130

KDFX Reference
KDFX Algorithm Specifications
Parameters:
Page 1
Dry In/Out
Dry Gain
Fdbk Kill
Max Fdbk
Page 2
DlySelect1
DlySelect2
DlySelect3
DlySelect4
Page 3
Dly Len A
DecayRateA
Gain A
Dly Len B
DecayRateB
Gain B
Out Gain
Dry In/Out
Dry Gain
Fdbk Kill
Max Fdbk
Tempo
Pan
HF Damping
10-48
In or Out
Off, -79.0 to 24.0 dB
On or Off
On or Off
Off, A, B, C, D
Off, A, B, C, D
Off, A, B, C, D
Off, A, B, C, D
0 to 32 bts
0.0 to 230.0 dB/s
Off, -79.0 to 24.0 dB
0 to 32 bts
0.0 to 230.0 dB/s
Off, -79.0 to 24.0 dB
The overall gain or amplitude at the output of the effect.
If set to In, Dry In/Out allows the dry input signal to be added to the final algorithm
output.
If Dry In/Out is In, then Dry Gain controls the level of the dry input signal that is
summed to the final algorithm output.
Forces the delay recirculation of all delay lines to stop by turning off the delay line
feedback. Fdbk Kill provides a quick way to silence the algorithm to start over with new
sounds in the delays. Fdbk Kill overrides the Max Fdbk and DecayRate parameters.
Prevents the recirculating delay lines from decaying by turning the delay line feedback
fully on. Max Fdbk overrides the DecayRate parameters, but does not function when Fdbk
Kill is On.
Tempo is the basis for the delay lengths, as referenced to a musical tempo in bpm (beats
per minute). When this parameter is set to System, the tempo is locked to the internal
sequencer tempo or to incoming MIDI clocks. In this case, FXMods (FUNs, LFOs, ASRs
etc.) will have no effect on the Tempo parameter.
The summed mono signal from the delay lines may be panned between left and right
output channels. -100% is panned fully left, 0% is centered, and 100% is fully right.
The -3 dB frequency in Hz of a one-pole lowpass filter (-6 dB/octave) placed in the
feedback path of each delay line. Multiple passes through the feedback will cause the
signal to become more and more dull.
Out Gain Off, -79.0 to 24.0 dB
Tempo System, 1 to 255 BPM
Pan -100 to 100 %
HF Damping 8 to 25088 Hz
Dly Len C 0 to 32 bts
DecayRateC 0.0 to 230.0 dB/s
Gain C Off, -79.0 to 24.0 dB
Dly Len D 0 to 32 bts
DecayRateD 0.0 to 230.0 dB/s
Gain D Off, -79.0 to 24.0 dB