Parameters For Dual Chorus 2 - Kurzweil K2661 Musician’s Reference Manual

KDFX Reference
KDFX Algorithm Specifications
Page 3
L PitchEnv

Parameters for Dual Chorus 2

Page 1
L Wet/Dry
L Out Gain
L Fdbk Lvl
Xcouple
Page 2
L Tap1 Lvl
L Tap2 Lvl
L Tap3 Lvl
L Tap1 Pan
L Tap2 Pan
L Tap3 Pan
Page 3
L LFO1Rate
L LFO2Rate
L LFO3Rate
L LFO1Dpth
L LFO2Dpth
L LFO3Dpth
Page 4
L Tap1 Dly
L Tap2 Dly
L Tap3 Dly
L HF Damp
L PitchEnv
Wet/Dry
Out Gain
Fdbk Level
10-56
Triangle or Trapzoid
-100 to 100%wet
Off, -79.0 to 24.0 dB
-100 to 100%
0 to 100%
-100 to 100 %
-100 to 100 %
-100 to 100 %
-100 to 100 %
-100 to 100 %
-100 to 100 %
0.01 to 10.00 Hz
0.01 to 10.00 Hz
0.01 to 10.00 Hz
0.0 to 50.0 ct
0.0 to 50.0 ct
0.0 to 50.0 ct
0.0 to 1000.0 ms
0.0 to 1000.0 ms
0.0 to 1000.0 ms
16 Hz to 25088 Hz
Triangle or Trapzoid
The relative amount of input (dry) signal and chorus (wet) signal that is to appear in the
final effect output mix. When set to 0%, the output is taken only from the input. When set
to 100%, the output is all wet. Negative values polarity invert the wet signal.
The overall gain or amplitude at the output of the effect.
The level of the feedback signal into the delay line. The feedback signal is taken from the
LFO1 delay tap. Negative values polarity invert the feedback signal.
R PitchEnv Triangle or Trapzoid
R Wet/Dry -100 to 100%wet
R Out Gain Off, -79.0 to 24.0 dB
R Fdbk Lvl -100 to 100%
R Tap1 Lvl -100 to 100 %
R Tap2 Lvl -100 to 100 %
R Tap3 Lvl -100 to 100 %
R Tap1 Pan -100 to 100 %
R Tap2 Pan -100 to 100 %
R Tap3 Pan -100 to 100 %
R LFO1Rate 0.01 to 10.00 Hz
R LFO2Rate 0.01 to 10.00 Hz
R LFO3Rate 0.01 to 10.00 Hz
R LFO1Dpth 0.0 to 50.0 ct
R LFO2Dpth 0.0 to 50.0 ct
R LFO3Dpth 0.0 to 50.0 ct
R Tap1 Dly 0.0 to 1000.0 ms
R Tap2 Dly 0.0 to 1000.0 ms
R Tap3 Dly 0.0 to 1000.0 ms
R HF Damp 16 Hz to 25088 Hz
R PitchEnv Triangle or Trapzoid