Kurzweil K2661 Musician’s Reference Manual page 228

KDFX Reference
KDFX Algorithm Specifications
Parameters (Gate+TubeAmp):
Page 1
In/Out
GateIn/Out
GateSCInp
Gate Chan
Page 2
Gate Thres
Gate Duck
Page 3
Bass Tone
Mid Tone
Treb Tone
In/Out
Out Gain
GateIn/Out
GateSCInp
Gate Chan
Gate Thres
10-146
Basic Flat response from 100 Hz to 4 khz with 24dB/oct rolloffs on each end
Lead 12 Open back hard American type with one 12" driver
2x12 Closed back classic American type with two 12" drivers
Open 12 Open back classic American type with one 12" driver
Open 10 Open back classic American type with one 10" driver
4x12 Closed back British type with four 12" drivers
Hot 2x12 Closed back hot rod type with two 12" drivers
Hot 12 Open back hot rod type with one 12" driver
In or Out
In or Out
L, R, (L+R)/2
L, R, (L+R)/2
-79.0 to 0.0 dB
On or Off
-dB 60 40
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
When set to In the effect is active; when set to Out the effect is bypassed.
The overall gain or amplitude at the output of the entire algorithm.
When set to In the gate is active; when set to Out the gate is bypassed.
Select the input source channel for gate side-chain processing—left, right or both. For both
(L+R)/2 the averaged magnitude is used.
Select which input channel will receive gate processing—left, right or mix. This selects the
mono input for the algorithm.
The signal level in dB required to open the gate (or close the gate if Ducking is On).
Out Gain
Gate Time
Gate Atk
Gate Rel
GateSigDly
||||||||||||||||||||||||||||||
❃ ❃
16 8
Tube Drive
Warmth
Cab Preset
Off, -79.0 to 24.0 dB
25 to 3000 ms
0.0 to 228.0 ms
0 to 3000 ms
0.0 to 25.0 ms
Reduction
4 0
Off, -79.0 to 60.0 dB
8 to 25088 Hz
Open 12, ...