Midi 10 (Pan); Midi 21 (Auxbend1); Midi 64 (Sustain); Midi 65 (Portsw) - Kurzweil K2661 Musician’s Reference Manual

Control Sources
MIDI Control Source List
8
9
10
11
12—14
15
16—19
20
21
22—31
64
65
66
4-6
MIDI 08 (Balance)
MIDI 09

MIDI 10 (Pan)

MIDI controller 10 is defined as Pan control. The Pan parameter on the CHANNELS
page in MIDI mode will respond to MIDI controller 10 unless the PanLock
parameter is turned on.
MIDI 11 (Express)
MIDI 12—14
MIDI 15 (AuxBend2)
The K2661 interprets MIDI Controller 15 as AuxBend2. A value of 64 is centered.
MIDI 16—19 (Ctl A—D)
MIDI 20

MIDI 21 (AuxBend1)

The K2661 interprets MIDI Controller 21 as AuxBend1, which is assigned by default
to the long ribbon (above the keyboard). A value of 64 is centered.
MIDI 22—31

MIDI 64 (Sustain)

This is the standard MIDI Controller number for Sustain. The control assignment
parameter FtSw1 is set by default to MIDI Controller 64, so a switch pedal on your
MIDI controller that sends MIDI 64 will send sustain messages to the K2661 by
default. The K2661 will always respond to sustain messages by sustaining currently
active notes.

MIDI 65 (PortSw)

This is the standard MIDI Controller number for Portamento Switch. The
Portamento parameter on the COMMON page in the Program Editor always
responds to this controller, and will turn Portamento on for monophonic programs
when the controller signal is at 64 or above. It won't affect polyphonic programs.
MIDI 66 (SostPD)
MIDI Controller 66 is defined as Sostenuto Switch. The control assignment
parameter FtSw2 is set by default to MIDI Controller 66, so a switch pedal on your
MIDI controller that sends MIDI 66 will send sostenuto messages to the K2661 by
default. The K2661 will always respond to sostenuto messages.