Water System - Dimension One Spas Bay Collection Owner's Manual

Water System

Symptom Problem
Water level too low
Pulsating jets
No Jet Action, 1.
or action is
2.
poor
3.
4.
5.
Possible sensor errors
The "Check
Water
Level....."
scrolling
message and /or
3 flashing
L.E.D.s appear
on the display.
Fountain The bottom of the
fountain has water that
doesn't drain
will not drain out.
64
2004 Bay Collection
Owner's Manual
Corrective Action
Fill with water to the bottom of the OptiMount
/Filter Basket.
Jets are turned off 1.
Diverter Valve 2.
turned
Dirty Filter 3.
Air lock 4.
Gate valve closed 5.
1.
2.
3.
4.
The water level in the spa is too high. Remove enough water to return the water
level to slightly below the bottom of the OptiMount
Skimmer/Filter Basket.
Turn jets on by turning jet face clockwise
Turn the Diverter Valve clockwise or counter clockwise
Clean Filter
Loosen pump union to allow air to bleed
Open gate valve
Check water level
Clean filter
If problem continues:
a. Turn off power
b. Restart the spa
If problem persists:
a. Call your dealer for service
®
located next to the Skimmer
®
located adjacent to the