Two-Sided Copying - Sharp AR-160 Operation Manual

TWO-SIDED COPYING

Two-sided copies can be made on this copier using the bypass tray.
20
1
Place the first original on the original table and make a
copy.
The first copy can be made using any of the paper feed stations.
●
2
Replace the first original with the second original and
close the platen cover.
Make sure that the first and second originals are oriented in the same
●
way on the original table.
When the originals are placed horizontally, make sure that the first and
●
second originals are oriented in the reverse way on the original table.
3
Turn the first copy over left to right and place it into the
bypass tray.
Be sure to feed the copies one sheet at a time.
●
4
Use the TRAY SELECT key to select the bypass tray.
5
Press the START key.