Two-Sided Copying - Sharp AR-151 Operation Manual

TWO-SIDED COPYING

Two-sided copying can be made on this copier using the bypass tray.
01C-2.p65
Downloaded from: http://www.usersmanualguide.com/
To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until the tray clicks into place.
Set the paper guides to the copy paper width. Insert the copy paper (print face down)
all the way into the bypass tray.
Paper must be fed narrow side into the feed slot.
●
Transparency film, labels, and other special purpose papers must be fed
●
individually.
When copying onto transparency film, remove each copy promptly. Do not
●
let copies stack up.
When loading an envelope, make sure that it is straight and flat.
●
Press the tray select (
using standard copy paper. Press the print (
Example: The following two originals will be copied onto two sides of copy paper.
First original Second original
17
) key to select the bypass tray. Set the number of copies if
) key.
Face up or face down
Face up
BYPASS FEED
Print face
Face down
2/11/00, 15:56
2
17