AR-151E CODE: 00ZAR151E/A1E DIGITAL COPIER AR-121E AR-151E MODEL ∗ This Service Manual describes only the differences from the AR-120E/150E. For the common items with the AR- 120E/150E, please refer to the AR-120E/150E manual. CONTENTS [ 1 ] GENERAL ......1 - 1 [ 2 ] CONSUMABLE PARTS .
[1] GENERAL The AR-121E/151E is the SRU model of the AR-120E/150E. While the AR-120E/150E employs the drum replacement, the AR-121E/151E employs the developer replacement. Therefore, the display on the opera- tion panel is changed from “ ” (drum) to “...
AR-151E [2] CONSUMABLE PARTS 1. Supply system table A. Europe subsidiaries/East Europe/SCA/SCNZ Name Content Life Product name Package Remark × 10 Toner CA(Black) with IC Toner AR-152LT LT=T∗10 (Toner :Net Weight 210g) × 10 Polyethylene bag × 10 250K Developer Developer AR-152LD LD=DV∗10...
AR-151E 11) Attach Upper developer unit and fix it with a screw. 2. Developer unit installation 12) Rotate the MG roller gear to distribute developer evenly. 1) 2) 3) Open the side and front cabinets of the copier. 4) Remove the locking tape of the developer unit. 5) Remove the screw which is fixing the copier and Developer unit.
AR-151E 4. TD cartridge replacement 1) Open the front and side cabinets of the copier. 2) Keep holding Toner lover, and 3) Carefully pull out Toner unit from the copier. 4) Insert Toner unit carefully into the copier. 5) Insert until the hook is engaged with the copier as shown in the fig- ure below.
AR-151E [3] SIMULATIONS 1. List of simulations The table below shows the simulations which are not provided for the AR-120E/150E but newly added to the AR-121E/151E. Simulation 26-38 of the SR-120E/150E is deleted in the AR-121E/151E. Main code Sub code...
AR-151E [4] USER PROGRAM The conditions of factory setting can be changed according to the use conditions. Functions which can be set with the user program Function Contents Factory setting When a certain time is passed after completion of copying, this function returns to the initial state Auto clear time automatically.
AR-151E [5] MAINTENANCE 1. Maintenance table : Check (Clean, adjust, or replace when required.) : Clean : Replace : Adjust : Lubricate Section Parts 100K Remark Developer Developing DV blade DV side seal (F/R) Process peripheral Drum 2. Maintenance display system Life 7.2K Press and hold the density adjustment LIGHT key for more than 5 sec, and the machine will enter the...