Electronic Sorting Kit (Ar-Eb3); Rotation Copying - Sharp AR-160 Operation Manual

ELECTRONIC SORTING KIT (AR-EB3)

If an electronic sorting kit (AR-EB3) is installed, the copier can perform
several additional useful functions. These functions are 2 in 1 and 4 in 1,
erase, margin shift, and sort/group functions. Also, rotation copying can be
performed and a multiple number of originals can be scanned and stored into
the memory. The memory can be expanded by adding commercially available
memories recommended by SHARP. For details, contact your dealer.
To use the 2 in 1 or 4 in 1 and sort/group functions, an
optional single pass feeder (AR-SP2) is needed. When
installing an electronic sorting kit, it is recommended to
install a single pass feeder.
58

Rotation copying

If user program No. 7 is set, the image of the original will rotate when the
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the auto paper select mode or auto copy ratio
mode has been selected. Even if user program No. 7 is not set, rotation
copying will function when the 2 in 1 or 4 in 1 function is selected. See page
37. However, if enlargement copying onto a paper size larger than A4 is
performed, the image cannot be rotated.
When this occurs, the detected size and orientation of the original will be
indicated by a steadily lighted indicator and a flashing indicator will show the
required orientation of the original. The original must be rotated 90° to match
the flashing indicator to prevent image loss on the copies.
Example: Copying from an A3 original onto A4 paper
Original Paper
Copy