Operating Your Mfp; Placing Document(S) In The Adf; Placing Document(S) On The Glass; Loading The Paper Cassette Tray - Oki C5510nMFP Setup And Installation Manual

OPERATING YOUR MFP

IMPORTANT NOTE!
Before sending a print job, be sure that the MFP is in
SCAN TO MODE. In COPY MODE, the printing
unitprinting unitwill not accept a print job.
For more information on operating your machine, see the on-
line Users Guide located on the supplied CD.

Placing document(s) in the ADF

1. Make sure your document is free of staples, paper clips and
is not torn.
2. If your have multiple pages, fan your documents to avoid
occasional paper jams. The ADF hold up to 50 pages.
3. Place your document(s) with the text FACE UP in the ADF
and make sure that the top of each page feeds in first.
4. Adjust the paper guides to center the document(s) in the
ADF.

Placing document(s) on the glass

1. Open the document(s) cover to reveal the glass.
2. Place your document(s) with the text FACE DOWN on the
glass and align the document(s) in the upper-left corner.
3. Close the document cover.

Loading the Paper Cassette Tray

Recommended Paper weight = 17 to 32 lb.
1. Remove the paper tray from the printer.
2. Fan the paper to be loaded to ensure all sheets are separated.
3. Load the paper into the paper cassette tray.
4. Adjust the rear stopper (1) and paper guides (2).
5. Replace the paper tray.
For more information, see the on-line User's Guide on the
Documentation CD provided with your printer.
17