Kyocera KM-1650 Operation Manual page 68

System Setting
• New Password
• Confirm new password
• Registration button
• Firmware Updates
If you want to change the administration password, type a new password into this field (up to 8
characters).
* The password that you register here is NOT related to the 4-number password that is required in order to
access the Network screen in the scanner itself.
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.
Once you type the new administration password into both the New Password and Confirm new
password fields and then click on this button, the new password will be registered in the Scanner
Interface Card.
* If you leave the Confirm new password field blank, or the password that you typed into that field does
not match the password that you typed into the Change admin password field, an error message will
be displayed.
IMPORTANT! BE SURE to click on the Registration button after you set or change the password.
Unauthorizede firmware updates present a potenially serious security threat. Someone could
unintentionally or maliciously render the networking inperable by updating the network component with
modified or incorrect firmware . the scanner network utilities provide security measures to prevent
unauthorized firmeware updates. If you allow "Update", select "Yes". If you do NOT allow it, select "NO".
Page 2-16