Kyocera KM-1650 Operation Manual page 48

Using the Scanner Function
3 . To move the "File name Input" key from the "Edit" Tab to the "Basic" Tab, select "On". To keep the "File
<Using the scanner with the "Priority "Input file name"" setting turned ON>
1 . Access the Scan to PC or Send E-mail screen, as appropriate, ("Ready to scan." is displayed). The
name Input" key in the "Edit" Tab, select "Off". Touch the "Close" key to register the change to that
setting.
* The factory default setting for inch specification scanners is "Off" while for metric specification
scanners it is "On".
following explains a scanning procedure using the Send to PC function.
Refer to "(3) Scanning under the Scan to PC and Send E-mail functions" on page 3-1 of the Set-Up
Edition of your Operation Guide for the procedure on accessing the Scan to PC and Send E-mail
screens.
Page 1-30