Kyocera KM-1650 Operation Manual page 247

Error Codes
Error
Cause of Error
Code
E021 The destination for the e-mail is listed
under the restricted domain names, or is
not listed under the permitted domain
name.
E022 The mail contained an e-mail address that
the SMTP server can not find.
E023 The SMTP server is not operating properly.
E024 SMTP Authentication error.
E030 The destination computer can not be found.
Either the Scanner File Utility is not running
or it is already communicating with another
scanner.
E031 The scanner attempted to transmit image
data, but the registered password did not
match the password in the destination
computer.
E032 During the Scan to PC operation, the hard
disk on the destination computer ran out of
available space.
• Check the restricted and/or permitted domain
names, and adjust the settings as necessary.
• Check to make sure that the destination e-
mail was entered correctly.
Check to make sure that the destination e-mail
address was entered correctly.
Check with your network administrator to find
out whether or not the SMTP server is working
properly.
Consult with your network administrator to
verify that the login Account Name and
Password required for SMTP Authentication
are correct.
• Check to make sure that the Scanner File Utility
is running properly in that computer, or whether
it is already connected to another scanner.
• Check to make sure that there are no
problems with any connections, such as
checking that the network cables are
connected properly.
Check the password that is set in the
destination computer.
Increase the available space on the destination
computer's hard disk and then try the
operation again.
Page A-3
Procedure for Correction