Kyocera KM-1650 Operation Manual page 45

Using the Scanner Function
3 . To select the Continuous Sending function as the default and, thereby, enable multiple scanning
<Switching between standard transmission and Continuous Sending >
1 . Access the Scan to PC or Send E-mail screen, as appropriate, ("Ready to scan." is displayed). The
operations at the same settings, select "On". To have the touch panel return to the default scanner
settings after each scanning operation, select "Off". Touch the "Close" key to register the change to that
setting.
* The factory default setting for inch specification scanners is "Off" while for metric specification
scanners it is "On".
following explains a scanning procedure using the Send to PC function.
Refer to "(3) Scanning under the Scan to PC and Send E-mail functions" on page 3-1 of the Set-Up
Edition of your Operation Guide for the procedure on accessing the Scan to PC and Send E-mail
screens.
Page 1-27