Extended Operation Panel Mk-733 (Optional) - Konica Minolta bizhub 215 User Manual

2.1 Control Panel
2.1.2

Extended Operation Panel MK-733 (Optional)

No. Name
1
Fax
2
Scan
3
Copy
4
Auto RX Indicator
5
Memory TX
6 On Hook
7
Redial/Pause
8
Speed Dial
9
AddressBook
10 Switching Plate
11 One-touch Dial Key
bizhub 215
Functions
Press this key to switch to the fax mode. The lamp
lights up green when the machine is in the fax mode.
Press this key to switch to the scan mode. The lamp
lights up green when the machine is in the scan
mode. (This function is available only when Network
Card NC-504 or Image Controller IC-209 is in-
stalled. )
Press this key to switch to the copy mode. The lamp
lights up green when the machine is in the copy
mode.
Lights up green when the machine is set in the Auto
RX mode.
Press this key to configure a memory transmission.
This lamp lights up green when the Memory TX mode
is set to ON.
Press this key to set the machine in the state to take
the phone off the hook. Repressing this key returns to
the state to hang up.
• Press this key to redial the recipient you called
lastly.
• This function is available during the wait time to
make a call from an extension line to an external
line or accept an information service.
Press this key to dial a fax number pre-registered in
the speed dial.
Press this key to display the information registered in
the one-touch dial, group dial, and speed dial.
Use this plate to switch One-touch Dial Key num-
bers. When the Switching Plate is closed down-
ward, one-touch dial keys 01 to 16 are available.
When it is opened upward, one-touch dial keys 17 to
32 are available.
• Press this key to dial a pre-registered destination.
• Use keys 01 to 32 to configure one-touch dial and
group dial settings.
• Use keys 29 to 32 to configure program dial set-
tings.
2
Page
p. 3-2
−
−
p. 3-25
p. 3-22
p. 3-17
p. 3-14
p. 3-9
p. 3-12
p. 3-8
p. 3-8
2-5