Fax Tx Setting; Fax Tx Setting Items; Specifying The Scanning Density; Specifying The Quality Priority - Konica Minolta bizhub 215 User Manual

7.4

Fax TX setting

7.4 Fax TX setting
Configure various transmission settings for fax communication.
7.4.1

Fax TX setting items

No. Fax TX setting
1 [DENSITY LEVEL]
2 [QUALITY PRIORITY]
3 [DEFAULT TX]
4 [HEADER]
5 [CONFIRM FAX NO.]
d
Reference
Fax TX settings can also be configured using LSU (Local Setup Utility). For details, refer to page 11-3.
If an optional Image Controller IC-209 or Network Card NC-504 is installed on this machine, settings can
also be configured using PageScope Web Connection. For details, refer to PageScope Web Connection
- [Address] - [Fax Configuration] of [User's Guide Network Administrator].
7.4.2

Specifying the scanning density

1
Press the Utility key.
2
Use +, to select [FAX TX OPERATION], and press the OK key.
3
Use +, to select [DENSITY LEVEL], and press the OK key.
4
Use *) to select the density, and press the OK key.
This returns to the fax TX settings screen.
7.4.3

Specifying the quality priority

1
Press the Utility key.
2
Use +, to select [FAX TX OPERATION], and press the OK key.
3
Use +, to select [QUALITY PRIORITY], and press the OK key.
4
Use +, to select a target image quality, and press the OK key.
This returns to the fax TX settings screen.
bizhub 215
Contents
Select the default density to scan the original from five levels. When
the paper color (background color) is darker, adjust to the light side.
When a text is faint or colored, adjust to the dark side.
Specify the default image quality (resolution) to scan the original with
a combination of [STD/TEXT], [FINE/TEXT], [S-FINE/TEXT],
[STD/PHOTO], [FINE/PHOTO], and [S-FINE/PHOTO].
• The factory default is [STD/TEXT].
Select the default transmission method from [MEMORY TX] and [ADF
TX].
• The factory default is [MEMORY TX].
Tips
This setting is displayed when optional Reverse Automatic Docu-
ment Feeder DF-625 is installed.
To specify whether to add a header (transmission date and time,
sender name, sender's fax number, and other items) when transmit-
ting a fax, select [ON] or [OFF] as the default.
• The factory default is [ON].
Tips
This setting item may not be displayed in some regions.
When specifying a fax destination with direct input, a screen appears
prompting you to enter the fax number again for confirmation. Enter-
ing the fax number twice prevents one from entering incorrect desti-
nations. Select [ON] or [OFF] as needed.
• The factory default is [OFF].
7
7-20