Konica Minolta bizhub 215 User Manual page 142

9.1 Primary messages and corrective actions
Message
[MEMORY FILE FULL]
[MEMORY FILE FULL]
[CANNOT CONNECT]
[CANNOT GET IP]
[WRONG PASSWORD]
[RECEIVE WRONG DATA]
[SERVER MEMORY FULL]
Error code: 0027
bizhub 215
Cause
The maximum number of memo-
ry files has been used during fax
transmission.
The maximum number of memo-
ry files has been used during fax
receiving.
An error has occurred during
connection with the server.
Cannot obtain the IP address.
Cannot connect to the POP3
server due to entry of an incor-
rect password.
Data that cannot be printed on
this machine was received. (The
attached file is not of the TIFF-F
type.)
A memory overflow has occurred
in the transmission server during
Internet fax transmission.
This machine is currently ac-
cessing the administrator mode
of PageScope Web Connec-
tion, LSU, or RSD.
Correction action
Remove the received data that is
saved in the memory.
Remove the received data that is
saved in the memory.
Reconfigure network settings in
the Utility screen. If this error re-
curs after a communication has
restarted, contact your network
administrator.
Respecify the IP address in the
Utility screen. If this error recurs
after a communication has re-
started, contact your network
administrator.
Specify the correct POP3 pass-
word in the Utility screen. If this
error recurs after a communica-
tion has restarted, contact your
network administrator.
Ask the sender to send a TIFF-F
file or correct type of text file.
Delete the transmission data that
is saved in the memory.
• Log out from PageScope
Web Connection.
• Disconnect the LSU.
• If no operation is performed
for 600 seconds, the display
returns to the basic screen.
• For an RSD communication,
consult your service repre-
sentative.
9
9-3