Proxy Settings - Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 User Manual

Proxy Settings

The Proxy Settings page allows you to override the server provided proxy settings for
communication with the Patch Management Server.
Figure 10-21: Proxy Settings
Configuring the Proxy Settings
Complete the following procedure to configure proxy settings.
1. Select Override the Server Provided Proxy Settings.
S R :
TEP ESULT
2. Type the proxy server's address in the Proxy Server Address field.
3. Type the port in the Proxy Server Port field.
4. If your proxy uses https, select the SSL Enabled field.
5. If you are using an Authenticated proxy:
a. Select Enter proxy authentication credentials.
The Proxy Server Address, Proxy Server Port and SSL Enabled fields
become active.
- 319 -
U A
SING THE GENT