Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual page 56

5 In the Remote Management dialog box, fill in the following fields:
Device: Specify the name or the IP address of the device you want to remotely manage.
Operation: Select the type of the remote operation (Remote Control, Remote View, or Remote
Execute) you want to perform on the managed device:
Authentication: Select the mode you want to use to authenticate to the managed device. The
two options are:
Password: Provides password-based authentication to perform a Remote Control
operation. You must enter the correct password as set by the user on the managed device
or as configured by the administrator in the security settings of the Remote Management
policy. The password set by the user takes precedence over the password configured by
the administrator.
Rights: This option is available only when you select the managed device on which you
want to perform the remote operation. If an administrator has already assigned Remote
Management rights to you to perform the desired remote operation on the selected
managed device, you automatically gain access when the session initiates.
Port: Specify the port number on which the Remote Management Agent is listening. By
default, the port number is 5950.
Session Mode: Select one of the following modes for the session:
Collaborate: Allows you to launch a Remote Control session and a Remote View session
in collaboration mode. However, you cannot first launch a Remote View session on the
managed device. If you launch the Remote Control session on the managed device, then
you get all the privileges of a master Remote Operator, which include:
56 ZENworks 10 Configuration Management Administration Quick Start
Inviting other Remote Operators to join the remote session.