Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual page 50

Wizard Page
Select ZENworks Image File
page
Summary page
Bundle Groups page
Add Assignments page
Schedules page
Finish page
Creating the Third-Party Image Bundle
To restore the third-party images, you must create the Third-Party Image bundle.
1 In ZENworks Control Center, click the Bundles tab.
2 In the Bundles panel, click New > Bundle to launch the Create New Bundle Wizard.
50 ZENworks 10 Configuration Management Administration Quick Start
Details
To select the image file:
1. Click to display the Server and Path Information dialog box.
2. Fill in the following fields:
Device Object, IP, or DNS: Select the ZENworks Server
where you stored the image.
File Path on Server: Browse for and select the image file. The
standard storage directory for image files is
\Novell\ZENworks\work\content-repo\images
3. Click OK.
Click Next to continue with the wizard and assign the bundle to the
target device.
You should not assign the image bundle to any groups. Click Next to
bypass this page.
Select the device where you want to apply the image.
You should not assign a schedule to the image bundle. Click Next to
bypass this page.
Click Finish to create the bundle and assign it to the selected
device.
.