Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual page 51

3 On the Select Bundle Type page, select Imaging Bundle, then click Next.
4 On the Select Bundle Category page, select Third-Party Image, then click Next.
5 Complete the wizard using information from the following table to fill in the fields.
Wizard Page
Define Details page
Select a Third-Party Image
File page
Summary page
Details
Specify a name for the task. The name cannot include any of the
following invalid characters: / \ * ? : " ' < > | ` % ~
To select a third-party image file:
1. Select the type of the image to be used in the bundle.
In ZENworks 10 Configuration Management SP3, only the
Windows Image Format (
( .gho ) are available.
2. Specify the shared-network directory containing the
files. The directory must be a Windows share or a Linux
.gho
SMB or CIFS share.
3. Click to browse for and select the network credentials to be
used for accessing the device having
4. If you want to use the WIM bundle as an Add-on image, select
Restore WIM as Add-on, and configure the following options:
Image Number (WIM Only): Select the index number of the
image to be restored.
Path to Restore the Add-on Image: Specify the location on
the device where you want to restore the Add-on image.
5. Click OK.
Click Next to continue with the wizard and assign the bundle to the
target device.
.wim ) and GHOST Image Format
.wim or .gho
Device Management
or
.wim
files.
51