Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual page 47

4 In the task list located in the left navigation pane, click Take an Image to launch the Take an
Image Wizard.
5 On the File Information page, fill in the following fields, then click Next.
Image Format: Select the format of the image to be taken for the device
Server and File Path: Click the
Configure the following options.
Server Object/IP/DNS: Click the
or DNS name of the Primary Server or the device that is promoted to the Imaging Server
role.
File Path on Server: Click the
file must have the
NOTE: You cannot browse to the specified file system if multiple search domains with
DHCP are configured for Linux and if the server is on Windows.
Shared Network Path for Image File: Specify the shared-network path where you want to
save the . or
wim .gho
share.
If you have not installed the Novell File Upload extension on this device, you must do so
before you can browse to and upload directories to be installed.
Image Filename: Specify the filename to save the .
displayed only for the Windows Imaging Format (.
Network Credential: Click
accessing the device having
Format (. ) and Ghost Image Format (
wim
Use Compression: Compression is required. Choose one of the following:
Balanced: Automatically balances compression between an average of the reimaging
speed and the available disk space for the image file. This option is displayed only for the
ZENworks Image format
icon to display the Server and Path Information dialog box.
icon to browse for and select the object, IP address,
icon to browse for and select an image file. The image
filename extension, meaning it is a valid ZENworks image file.
.zmg
files. The directory must be a Windows share or a Linux SMB or CIFS
to browse for and select the network credentials to be used for
files. This option is displayed only for the Windows Image
.wim
).
.gho
or the file. This option is
wim .gho
) and Ghost Imaging Format
wim
.
(.gho)
Device Management 47