Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 90

NOTE
Increase the level of verbosity by providing additional instances.
--quiet, -Q
When doing an attribute query using -G, print just the value to stdout. Use this
option with -G.
--get-value, -G
Retrieve rather than set the preference.
--delete-attr, -D
Specify the attribute to delete.
--attr-id string, -i string
For advanced users only. Identifies the id attribute.
--attr-value string, -v string
Specify the value to use. This option is ignored when used with -G.
--node-uuid node_uuid, -u node_uuid
Specify the UUID of the node to change.
--node-uname node_uname, -U node_uname
Specify the uname of the node to change.
--resource-id resource name, -r resource name
Specify the name of the resource on which to operate.
--inhibit-policy-engine, -!
For advanced users only.
Examples
Reset the failcount for the resource myrsc on the node node1:
crm_failcount -D -U node1 -r my_rsc
Query the current failcount for the resource myrsc on the node node1:
crm_failcount -G -U node1 -r my_rsc
82 Heartbeat