Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 46

10 Click the Add button at the bottom of the page to add the resource to the group.
4.9.1 Adding a File System to the Resource
1 Using the HA Management Client, select Resources, and then select Add New
2 Choose Native as the resource item type, then click OK.
3 Specify a resource name (ID) for the file system resource, and in the Belong to
4 In the Type section of the page, scroll down the list and select Filesystem as the
38 Heartbeat
The Ordered value specifies, if the resources in the group will load in order
you specified. The Collocated value specifies whether the resources in the
group will run on the same server.
5 Specify a resource name (ID) for the IP address resource portion of the group.
6 In the Type section of the page, scroll down the list and select IPaddr2 (OCF
Resource Agent) as the resource type.
7 In the Parameters section of the page, find the line that was added for the IP
address resource, click the line once, then click the line again under the Value
heading to open a text field.
8 Add the IP address for the IP address cluster resource.
9 Click the Add Parameter button, select nic as the name and enter eth0 as the
value, then click OK.
The name and value are dependent on your hardware configuration and what
you chose in Step 3
Group
Item, or click the + button.
Group field, select the group you created above.
resource type.
(page 31).