Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 40

5 Select the resource Type from the list. To display a brief description of that re-
6 Conditional: After selecting a resource type, a line for that resource type might
7 Click Add at the bottom of the screen to add the resource to the cluster.
32 Heartbeat
source type, double-click any of the resource types in the list.
be added to the Parameters section of the screen. If a line is added, click the line
once and then click the line again under the Value heading to open a field where
you can add the needed value.
6a Add the needed value for the resource.
For example, if you selected an IP address as the resource type above, enter
the IP address for the resource.
6b Click Add Parameter, specify the parameter Name and Value, then click OK.