Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 47

5 In the Parameters section of the page, find the line that was added for the file
system resource, click the line once, then click the line again under the Value
heading to open a text field.
6 Add the name of the file system. For example, Reiser.
7 Click the Add Parameter button and select Device as the name. For the value,
specify the device where the file system is located, then click OK.
The name and value are dependent on your hardware configuration. For example,
you could specify /dev/sdc as the value if the file system is on that device.
4.9.2 Adding the Web Server to the
Resource Group
1 Using the HA Management Client, select Resources, and then select Add New
Item, or click the + button.
2 Choose Native as the resource item type, then click OK.
3 Specify a resource name (ID) for the Web Server resource, and in the Belong to
group field, select the group you created above.
4 In the Type section of the page, scroll down the list and select Apache as the re-
source type.
5 In the Parameters section of the page, find the line that was added for the Apache
Web server resource, accept or change the path to the Apache Web server, then
click OK.
NOTE
If you want to enable resource monitoring for a group resource, you must
configure monitoring separately for each resource in the group that you want
monitored.
Configuring and Managing Cluster Resources 39