Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 142

ocf:iscsi (7)
ocf:iscsi — iscsi resource agent
Synopsis
[OCF_RESKEY_portal=string] OCF_RESKEY_target=string
[OCF_RESKEY_discovery_type=string] [OCF_RESKEY_iscsiadm=string]
[OCF_RESKEY_udev=string] iscsi [start | stop | status | monitor | validate-all |
methods | meta-data]
Description
OCF Resource Agent for iSCSI. Add (start) or remove (stop) iSCSI targets.
Supported Parameters
OCF_RESKEY_portal=portal
The iSCSI portal address in the form: {ip_address|hostname}[":"port]
OCF_RESKEY_target=target
The iSCSI target.
OCF_RESKEY_discovery_type=discovery_type
Discovery type. Currently, with open-iscsi, only the sendtargets type is supported.
OCF_RESKEY_iscsiadm=iscsiadm
iscsiadm program path.
OCF_RESKEY_udev=udev
If the next resource depends on the udev creating a device then we wait until it is
finished. On a normally loaded host this should be done quickly, but you may be
unlucky. If you are not using udev set this to "no", otherwise we will spin in a loop
until a timeout occurs.
134 Heartbeat