ocf:o2cb (7)
ocf:o2cb — OCFS2 membership layer manager.
Synopsis
OCF_RESKEY_netdev=string OCF_RESKEY_port=string
[OCF_RESKEY_ocfs2_cluster=string] o2cb [start | stop | notify | monitor | vali-
date-all | meta-data]
Description
This script manages the Oracle Cluster membership layer. It obsoletes manual configu-
ration of the nodes in /etc/ocfs2/cluster.conf, and automates the discovery of the IP
addresses uses by o2cb. It should be used below one or more ocfs2 mounts managed
by Filesystem.
Supported Parameters
OCF_RESKEY_netdev=Network device for o2cb
The network interface label which you want o3cb to run over.
OCF_RESKEY_port=Port number
The port number you want o2cb to use for communications.
OCF_RESKEY_ocfs2_cluster=o2cb cluster name
The name of the cluster for which this resource is managing the membership. The
default is likely fine.
HB OCF Agents
143