Novell SUSE LINUX ENTERPRISE SERVER 10 SP2 HEARTBEAT Manual page 34

10 Select the resource in the left pane of the main window, then click Resources
Procedure 3.2 Migrating Resources to Another Node
To migrate the newly created resource to another node in the cluster, you can use either
the HA Management Client or the command line.
1 It the command line, use the following command:
2 To use the HA Management Client for migration, select the resource you want
26 Heartbeat
4 Enter a Resource ID (name) for the IP address resource. For example,
ipaddress1.
5 In the Type section of the page, scroll down the list and select IPaddr (OCF
Resource Agent) as the resource type.
6 In the Parameters section of the page, find the line that was added for the IP
address resource, click the line once, then click the line again under the Value
heading to open a text field.
7 Add the IP address for the IP address cluster resource.
8 Click the Add Parameter button and from the drop-down list, specify nic as
Name and eth0 as Value, then click OK.
The name and value are dependent on your hardware configuration and what
you chose for the media configuration during the Heartbeat installation.
9 Click the Add button at the bottom of the page to add the resource to the
cluster.
> Start to start the new resource on the cluster.
crm_resource -M -r resource_name -H hostname
For example, to migrate a resource named ipaddress1 to a cluster node named
node2, you would need to enter:
crm_resource -M -r ipaddress1 -H node2
to migrate in the left pane of the main window and select Resources > Migrate
Resource.