NETGEAR DGND3800B User Manual page 113

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
To launch this function, click the Windows Start button, then select Programs >
NETGEAR ProSafe VPN Client > Log Viewer. The VPN Status/Log screen for a
successful connection is shown in the following figure:
Use the active VPN tunnel information and pings to determine
Note:
whether a failed connection is due to the VPN tunnel or some
reason outside the VPN tunnel.
The Connection Monitor screen for this connection is shown in the following figure:
In this example you can see these settings:
The modem router has a GW address (public IP WAN address) of 22.23.24.25.
•
The modem router has a remote address (LAN IP address) of 192.168.3.1.
•
The VPN client computer has a local address (dynamically assigned address) of
•
192.168.2.2.
While the connection is being established, the Connection Name field in this screen displays
SA before the name of the connection. When the connection is successful, the SA changes
to the yellow key symbol shown in the previous figure.
While your computer is connected to a remote LAN through a VPN, you might not have
normal Internet access. If this is the case, you have to close the VPN connection to have
normal Internet access.
Virtual Private Networking
113